Prerelease build of Nginx connector for ColdFusion 2016 now available

Nginx is a high-performance and open-source web server that is widely used in the web communityIt can now be configured with ColdFusion 2016. With this post we are making available the prerelease build of the web-server connector for testing purposes. 

The prerelese build is in the form of an Linux 64-bit installer that packages the following 2 components:

– The Nginx web server installer. This installer is a variant of the standard Nginx installer that packages the AJP modules that enbable the communication between the webserver and ColdFusion.

– WSconfig.jar. This is a modified version of the library present in ColdFusion's <cf_root>/cfusion/lib directory, that is required by the WSConfig tool when configuring a web server connector. 

For detailed instructions on installing the webserver and configuring the connector, refer this document.  

We will look forward to your suggestions and feedback.

Click on this link to download the source for the Ngnix Connector.

Revision (09 Jan 2017): The download link for Ngnix Connector source added.



Understanding various types of memory and tuning in ColdFusion

Memory management is the process of recognizing, when allocated objects are no longer needed, deallocating (freeing) the memory used by such objects, and making it available for subsequent allocations. Since ColdFusion is an application server, ColdFusion requires memory management for effective performance improvement.

Sun Java differentiates memory across five generations:

  1. Young Generation: This generation holds objects with a high mortality rate. In ColdFusion, usually this space holds a variable that only exists in one page, for example – variable scope.
  2. Tenured Generation: This generation holds objects that live for a longer duration. For example, in ColdFusion, client and session scope variables.
  3. Permanent Generation: This generation holds all the reflective data of the virtual machine itself, such as class and method objects.
  4. Minor collections: This type of Garbage Collection (GC) occurs in the Young generation. In ColdFusion, minor collection collects unreferenced local scope and variable scope variables
  5. Major collection: This type of GC occurs in tenured generation. In ColdFusion, this collection collects all unreferenced session scope variables.


We can optimize the amount of memory allocated to ColdFusion server, for better performance. Let us discuss some of the parameters, which will help in Memory tuning.

  1. -Xmx – Defines maximum Java heap size.
  2. -Xms – Defines minimum Java heap size.
  3. MaxPermSize / MaxMetaspaceSize: The JDK 8 JVM uses native memory for the representation of class metadata and is called Metaspace. Users with JDK1.7 or lower will see the attribute MaxPermSize, and users with JDK 8 will see the attributes MaxMetaspaceSize.


Garbage Collection

Garbage collection refers to the process of recycling memory that was assigned to objects no longer referenced by a program. Garbage collection can be divided into 2 types:

  • Minor collection: Garbage collection that occurs in the young generation. In ColdFusion, minor collections will collect unreferenced local scope and variable scope variables
  • Major collection: Garbage collection that occurs in tenured generation. In ColdFusion, this will collect all unreferenced session scope variables.


Concurrent Collector

If the sites on your server are primarily lightweight request/response applications where response times are critical, then the concurrent garbage collector is a viable choice for your server. This collector does its best to collect dead objects from memory while applications on the server are still processing data. This adds a small bit of overhead for transactional applications, but it helps applications maintain their response-time SLAs.  To enable concurrent collector You need to add one of the following jvm arguments in jvm argument -XX:+UseConcMarkSweepGC  or -XX:+UseG1GC

For more information on concurrent collector please click here

Parallel Collector

If the applications on your server are memory-intensive and allocate a lot of objects, then the parallel garbage collector is a viable choice for your server. Any application performing image manipulation or creating a lot of objects is a great candidate for the throughput collector. To enable this garbage collector, add the following JVM arguments in the jvm.config: -XX:+UseParallelGC

 For more information on Parallel collector please click here  


Where to make the chnages?

You can make the changes at ColdFusion administrator (Settings >>Java and JVM >> JVM Arguments). 

Alternatively, you can tune memory in jvm.config, located at ColdFusion install directory (cf_root >> instance name >> bin >> jvm.config). 

Note: It’s always recommended to take a backup of jvm.config before making any changes.


Sever Monitor

If you have an Enterprise edition of ColdFusion, you can use Sever Monitor to monitor your server. You need to go to ColdFusion Administrator >> Server Monitor. To Start and Stop Monitoring, profiling, and memory tracking, click the appropriate buttons o of the server monitor.

Let us discuss about the Server Monitor in detail.

  1. Start Monitoring: This feature gathers information about all requests, including active requests, slowest requests, active sessions, cumulative server, etc. The Server Monitor does not gather information for requests that are excluded on the filter settings page.
  2. Start Profiling: It starts tag and function timing information for the slowest request reports, active queries, slowest queries, cached queries, and query cache status. You can view about each request that is slow or consumes a lot of memory. You can use this feature on development server. We do not recommend you to use this feature in a production environment.
  3. Start Memory Tracking: It gathers information about memory consumption, including all memory usage, queries and session that use most memory. You must enable profiling to view query-related reports.


You need to see if there is any effect on non-heap or heap memory at all. What needs to be deduced from the graph is, if the non-heap memory increases then, the perm gen/metaspace value needs to be recalculated. Whereas, if the heap memory increases, then the Xmx needs to changed.

You can also take help from some 3rd party software to monitor your server like GC viewer. You can also use Jconsole.  It is another memory management tool provided within JDK. The usage information is available at

Follow the same procedure, mentioned above for non-heap or heap memory monitoring and tuning.


Taking Thread Dumps from ColdFusion Server Programmatically

Many times you would want to tweak the performance of the ColdFusion server or want to debug the bottlenecks that make the server unresponsive.

To analyze this, ideally you would want to have Thead dumps and Server memory snapshot(Heap Space, Eden Space, Survivor Space, Old Gen, Perm Gen).

While you can use JDK tools like jstack to get the dumps, it is tedious to install it and schedule the thread dumps.

So, programmatically thread dumps and memory snapshots are are triggered and can be configured as a scheduler task and can be triggered on-demand as well.

Download the following zip file and move it to the server where you want to take thread dumps.

This zip file contains two files. One is threaddump.jar file.

Place this file under: C:ColdFusion11cfusionwwwrootWEB-INFlib and restart the server for it to load.

And the other file is the cfm file takethreaddump.cfm where the call to ThreadDump class is made and the path where the dump content should be written.

By default it is dumped to the file #GetTempDirectory()#/threaddump<Day>-<Month>-<Year>.log

(Depending on the server location it translates similar to C:ColdFusion11cfusionruntimeworkCatalinalocalhosttmpthreaddump12-8-2015.log)

You can change this to any other convenient path in the cfm file.

You can call this cfm on-demand at point of time or configure a new scheduled task to schedule it at some interval.

More number of Thread dumps are more helpful for problem analysis. So, it is better to take at some interval.

On every new day, dump is rotated automatically to a new file name.


ColdFusion 11 IIS Connector Tuning

Connector tuning is an essential part of setting up a ColdFusion server. There are various configurations in connector that needs to be tuned. Incorrect values may lead to “Service Unavailable” or “Server too busy”. In this blog, we will discuss how to handle such errors caused by incorrect tuning and how to tune the connectors for the site correctly.

The connector setting may vary from site to site. It is very important to configure the connectors for your application appropriately. This blog will include connector tuning parameters for IIS. During installation, user can choose to configure connector for “Individual Site” or “ALL” sites in IIS connector configuration.

Configure Web Server

After the installation, the user can launch the “Web Server Configuration tool” and has the availability to create the connector for “Individual Site” or “ALL” sites in IIS.

Add Web Server configuration

When connector is configured with individual sites, separate connector for each site will be placed under {CF-Home}/config/wsconfig/{some no}/. Similarly for “ALL” configuration the connector is configured at global level, which means the same connector binary will be used across multiple sites.

The three most important parameters will be discussed here and will help us to understand the role of the same:-

  • Reuse Connections
  • Connection pool size
  • Connection pool timeout

Re-use connections: – This setting determines the count of connections that can be re-used. When Tomcat connector makes a connection with Tomcat server, it does not closes the connection even after it finished serving the request. Instead it keeps the connection active, so that for the next request, the same connection can be re-used. This increases the performance by minimizing the overhead of creating new connection with tomcat server for every request. This settings needs to be tuned for connector configured with multiple sites. The max value for the re-use connection is determined based on the number of sites configured with same CF server and the load on each site.

The default re-use connection is 250.

Connection pool size: – This setting determines the maximum number of connections that can be created in the connection pool. When multiple requests arrive to the connector from IIS, connector creates new connections in the connection pool only if there are no free connections available in the pool. The connector will not create a new connection if connections reach the connection pool size limit. When connector is configured with “ALL” sites, the same connection pool will be used to serve the request for all sites. So the default value of the connection pool size, works well with the single site configuration, but fails to work well with “ALL” site configuration in some scenarios. Hence this value should be increased carefully based on the need and number of sites that are present within IIS.

The default connection pool size is same as, which is 250.

Connection pool timeout: – This setting determines the timeout value (in seconds) for idle connections in connection pool. This value must be in sync with the connectionTimeout attribute of your AJP connector in Tomcat's server.xml.

The default timeout for connection is indefinite, if not set in server.xml explicitly.

There are other parameters which CF connector inherits from Tomcat AJP connector. Please find the details of those settings from AJP documentation (

The is available at {CF-Home}/config/wsconfig/{some no}/ and the server.xml can be found at {CF-Home}/cfusion/runtime/conf/. Below are the changes required to tune the Site:-

  • Open the file, add below line as new entry worker.cfusion.connection_pool_size=500 (This is connection pool size inside connector which are available to handle request)
  • Tune the entry for max_reuse_connections to appropriate value based on number of site. Optimal value is connection_pool_size / {no of site}
  •  Add another entry in new line worker.cfusion.connection_pool_timeout=60 (This value is idle connection timeout (in seconds), when sites are not under load connections will be recycled back to IIS)
  • Now open the server.xml from {cf-home/cfusion/runtime/conf}, add/update the maxThreads=500 and connectionTimeout="60000" to connection node containing the AJP entry.
    <Connector port="8012" protocol="AJP/1.3" redirectPort="8445" tomcatAuthentication="false"/>

  • Now the AJP entry in server.xml should look like 
    <Connector port="8012" protocol="AJP/1.3" redirectPort="8445" tomcatAuthentication="false" maxThreads="500" connectionTimeout ="60000"> </Connector>




There can be multiple use cases. Let us consider three most widely used scenarios:-

  •  Connector created with “ALL” OR with “Individual” Site and single site in IIS
  • Connector created with “ALL” and multiple sites in IIS
  • Connector created with “Individual” site and multiple sites site in IIS



Use Case# 1: Connector created with “ALL” OR with “Individual” Site and single site in IIS

In an idle scenario, where the user has only one site (configured with ALL or individual connector) and not running under high load, the, can look like this







And server.xml should look like

<Connector port="8012" protocol="AJP/1.3" redirectPort="8445" tomcatAuthentication="false" maxThreads="500" connectionTimeout ="60000"> </Connector>

So, we added the connection_pool_size and connection_pool_timeout (in seconds) in the The corresponding connectionTimeout (in milliseconds) is added to server.xml along with maxThreads whose value is equivalent to the connection_pool_size in the

Use Case# 2: Connector created with “ALL” and multiple sites in IIS

Consider a scenario that the connector is created with “ALL” and there is only one site which is running under load. The default 250 re-use connections are utilized by site 1. Later on, the user adds another site in IIS.

Site 1 will make all 250 re-usable connections with ColdFusion and any request for new connection from site 2 will be ignored by ColdFusion. Hence it is required, to increase the re-use connection count to optimal value, so that site 2 does not starve for new connections. This can be achieved by configuring optimal value of max_reuse_connections count. Considering that the site 2 is not running under high load, 100 re-use connection will work. So the max_reuse_connections becomes 350 {250 (for site 1) + 100 (for site 2)}. But, it is a good practice, to start tuning the connection_pool_size first, and then the max_reuse_connections appropriately.

This case would require connection_pool_size=700, as max_reuse_connections= connection_pool_size / {no of site}. So, the will look like this







And server.xml should look like

<Connector port="8012" protocol="AJP/1.3" redirectPort="8445" tomcatAuthentication="false" maxThreads="700" connectionTimeout ="60000"> </Connector>

Note: The connectionTimeout is in milliseconds

Use Case# 3: Connector created with “Individual” site and multiple sites site in IIS

Consider a scenario that the individual connectors are created for each site. There are three sites – Site 1 is running under high load, site 2 and site 3 running are under low load. For all the sites, there are individual connectors. Now, ideally in this scenario, we should start tuning with the site running under high load first. We can disable the timeout for high traffic sites, if we are not sure for timeout. If not defined, the default timeout for connection is indefinite. To start with, don’t specify the re-use parameter. Set the connection_pool_size=500 and monitor the site. Gradually increase the value by 100 and likewise, till the site is stable. Say, at connection_pool_size=800, the site is stable. Now, set the max_reuse_connections=270 (connection_pool_size / {no of site} i.e. 800/3=270 approx)

Site 1







Site 2 and site 3 are running under low traffic, but are bind to same ColdFusion instance (cfusion in this case). The below settings should be optimal:-

Site 2







Site 3







And server.xml should look like

<Connector port="8012" protocol="AJP/1.3" redirectPort="8445" tomcatAuthentication="false" maxThreads="1300" connectionTimeout ="60000"> </Connector>

Note: The connectionTimeout is in milliseconds and the maxThreads is the value equivalent to summation of all the connection_pool_size(s). So, in this case maxThreads=1300 {800 (for site 1) + 250 (for site 2) + 250 (for site 3)}.

Some key points to remember:-

  • The connector tool should always run with “Run as Administrator” feature, even if the user is from the Administrator group i.e.

    Using the command line:-

    Connector Tool cmd

    Using the GUI

    Connector Tool gui

  • Any changes made to {CF-Home}/config/wsconfig/{some no}/, including isapi_redirect.dll or, would require an IIS restart.
  • Any changes made to {CF-Home}/cfusion/runtime/conf/server.xml requires “ColdFusion 11 Application Server” service restart.
  • max_reuse_connections should always be less than or equivalent to connection_pool_size. It can’t be larger than the connection_pool_size.
  • The above use cases are scenario based and may vary from site to site, depending upon the load, architecture and traffic on the site.

ColdFusion Splendor Public Beta E-seminar Series

We have a series of e-seminars lined up that gives you a good understanding of the various features of ColdFusion Splendor, which is now in public beta. If you haven’t downloaded ColdFusion Splendor already, here is the link where you download the public beta.

Here are the list of e-seminars:

1. Title- Public Beta E-seminar: ColdFusion Splendor Overview Date: 1st April Time: 8 am pacific. Find the recording for the e-seminar here

2. Title- Public Beta E-seminar: Everything about Mobile Application Development Date: 10th April Time 8 am pacific. Find the recording for the e-seminar here

3. Title- Public Beta E-seminar: Delicious Language Enhancements in ColdFusion Splendor Date: 12nd April Time 8 am pacific. Find the recording for the e-seminar here 

4. Title- Public Beta E-seminar: Pixel Perfect PDFs in ColdFusion Splendor Date: 24th April Time 8 am pacific. Find the recording for the e-seminar here




Public Beta for ColdFusion and ColdFusion Builder is now available!

In case you haven’t already noticed,the public beta for the major version of ColdFusion codenamed Splendor and for the next major version of ColdFusion Builder Thunder is now available.

Here is where you can get access to the public beta for both the products on Adobe Labs –

You can quickly go over what’s new in ColdFusion Splendor here. There are also a couple of videos on the video tab that gives you a quick introduction to what’s new in ColdFusion. The link for the documentation home page is at –

There are lots of new features and enhancements in Splendor and in Thunder. We look forward to hearing your feedback during the public beta.





Announcing the new ColdFusion Community Portal


Here’s the all new ColdFusion Community portal launched by Adobe :

The community portal is one centralized access point for information on the latest in ColdFusion. It also provides our partners and consultants to showcase their capabilities and latest innovations with the platform. It is also a User Group hub where ColdFusion developers can find information related to various User Groups and their events.

We are pleased to announce the launch of ColdFusion Community portal with the aim to make it a go-to place for the ColdFusion community. The idea is to integrate ColdFusion content created not just by the product team at Adobe, but also by our partners and you the community. We believe such content will be of immense use to everyone in the ColdFusion community. 

Please go through the portal and let us know how we can further improve it. You can send an email with your inputs/comments to Kishore Balakrishnan , Marketing Manager for ColdFusion.

The portal is built using the popular Mura CMS! 


The ColdFusion 10 Advantage Webinar by Ben Forta

ColdFusion webinar by none other than Ben Forta on Feb 27th (2:00pm Eastern; 11:00am Pacific)!


The ColdFusion 10 Advantage


ColdFusion needs no introduction, it helped usher in the era of web based applications over a decade and a half ago, and remains an innovator in this space to this day. With each update, ColdFusion has further empowered us to build and create the ultimate online experiences, and ColdFusion 10 is no exception.

ColdFusion 10 is indeed a very important release, one which builds on the success of ColdFusion 9 by adding invaluable new features and functionality, all intended to make developers more productive than ever before.

Key Takeaways

In this session you will learn about HTML5 and client enhancements that make CF10 more productive, and will also discover why CF10 is more powerful, more secure, more scalable, and better integrated, than ever before.

Register here!